new test tubes

Test tubes with groove

Test tubes with a grooved rim enable the compensation of excess pressure, without opening the cap. Therefore, caps, that are similar to freeze-drying stoppers, are used. These allow air to escape from the inside of the tubes, through the groove on the rim. The hotshaped groove doesn‘t have sharp edges and allows safe handling.

Materials

  • Soda-lime glass (e.g. AR©)
  • Borosilicate glass (e.g. DURAN©, PYREX©, SIMAX©)
  • Neutral glass (e.g. FIOLAX© and DUROBAX©)
  • Aluminium silicate glass (e.g. Schott 8252/8253)
  • Quartz glass (naturally melted quartz glass and synthetically produced quartz glass, incl. F300)


Process of Production

  • Hot forming


Dimensions

  • Diameter: 4 - 30 mm
  • Lengths: 30 - 300 mm
  • Wall thicknesses: 0,6 - 1,8 mm


Design

  • With groove
  • With hole


Geometries

  • Round


Advantages

  • Direct ventilation
  • Glass tube with side-opening
  • Glass fibers with sphere formed end
  • NMR Tubes with thread for low vacuum applications
  • Mark tubes with special inner surface
  • Mini test tubes with extended flange
  • New preform for redrawing of capillaries
  • Test tubes with sagging at the bottom
  • Cloning cylinders with numbering
  • Large-volume theta cross-section capillaries
  • High tightness with new standard cap
  • Complex component made of quartz glass
  • Dropper pipettes in many sizes and designs
  • Packing glasses protected from light
  • Ampoules with built-in test leckage
  • Thick-walled sample vessels
  • Measuring ampoules with conical bottom
  • Special glass capillaries for measurements
  • Glass capillaries with constriction
  • Finely scaled glass cannulas
  • CNC processing of glass plates
  • New 5 mm NMR standard caps
  • Glass crucible for thermal analyses
  • Glass capillaries with graduation
  • Square capillary with 9 internal channels
  • 9-fold capillary made of borosilicate glass 3.3
  • Our tool for cutting glass capillaries
  • Diamond wire for cutting capillaries
  • Sight glasses (laser structured)
  • Very thick-walled capillaries
  • Polyimide coated filling needles
  • Ampoules with small volume
  • NMR tubes colored (UV protection)
  • NMR septum caps (increased denseness)
  • NMR tubes (barcode & constriction)
  • Mark tubes with perforated bottom
  • Test tubes with hole e.g. as vent
  • Test tubes with grooved rim
  • Oval capillaires (thin-walled)
  • Triangular capillaries (thin-walled)
  • Twisted capillaries by hot forming
  • Multi-channel capillaries (circular array)
  • Special light pipe made of glass
  • Luggin-capillary for measurements
  • Test mandrels (different materials)
  • Carpoules with special-rolled rim
  • Glass capillary for the stimulation
  • XRD-capillary with Luer-connector
  • Glass nozzle with seal-and retaining ring
  • Glass capillary with side-mounted connectors
  • Easily destructible glass ampoules
  • Glass rods with surface patterning
  • Long-conical focusing nozzles
  • Surface patterning of glass substrates
  • Laser sublimation-drilling in flat capillaries
  • Thin needles up to 180 ° flexible
  • Glass needles with curved tip
  • Polished to precision glass rings
  • Glass rods with partially-frosted surface
  • Sealing glass with high thermal expansion